Electrolux RH14DD3U, RH14RE4HU Foreword, Intendeduseandlimitations, 3TESTING, Generalsafetyrules

A.1 GENERAL INFORMATION

A.1.1 FOREWORD

The purpose of this manual is to provide the necessary informa- tion for the correct installation, operation, use and maintenance of the appliance.

Consequently, the manual and all the technical documentation enclosed with the appliance must be kept with the appliance at all times so that they can be consulted by the technician or end user. It is important to inform the appliance user about regu- lations concerning safety during and after installation.

Read the instructions in the manual carefully before carrying out any operation whatsoever on the appliance, as they give impor- tant information about the standards and rules governing its installation and safe use. Improper installation, adjustment, alteration, service or maintenance can cause property dam- age, injury or death. Failure to observe the instructions in this manual when carrying out any operations on the appliance will relieve the manufacturer of all liability. The manufacturer also declines any responsibility in the event of problems caused by the use of non-original spare parts.

No part of this manual may be reproduced.

A.1.2 INTENDEDUSEANDLIMITATIONS

This appliance has been designed for the refrigeration and preservation of foodstuffs. Any other use is to be considered improper.

ATTENTION: these appliances are not suitable for installation outdoors and/or in environments subject to natural elements (rain, direct sunlight, etc.).

The manufacturer declines all liability for any improper use of the product.

A.1.3TESTING

Our appliances have been designed and optimised with labo- ratory testing to give high performance and efficiency. The product has gone through 100% testing and is ready for use. The certificates guaranteeing that the tests (visual inspection - electrical test - functional test) have been passed are included with the appliance and are included in specific enclosures.

(section D.5).

A.1.4 GENERALSAFETYRULES

The appliance is manufactured in compliance with the following directives:

- Hygiene: ANSI / NSF 7

-Safety: ANSI / UL 471

-CAN / CSA C22.2 No.120 - M91

Current regulations in force are applicable.

A.1.6 DATA PLATE POSITION

The data plate with all the appliance specifications is located on the refrigeration unit compartment at the top right hand side. There is also a plate bearing the appliance’s PNC code and serial number located underneath the logo.

A.1.7PHYSICALSAFETYFEATURES,HAZARDS The appliance has no sharp or projecting parts.

DANGER! DO NOT REMOVE. There are guards on the units to prevent access to components which require air movement.

A1.8IMMEDIATEINSPECTFORSHIPPINGDAMAGE

The container should be examined for damage before and during unloading. The freight carrier has assumed responsi- bility for its safe transit and delivery. If damaged equipment is received, either apparent or concealed, a claim must be made with the delivering carrier. Apparent damage or loss must be noted on the freight bill at the time of delivery. The freight bill must then be signed by the carrier representative (Driver). If the bill is not signed, the carrier may refuse the claim. The supplier can supply the necessary forms. A request for inspection must be made to the carrier within 15 days if there is concealed damage or loss that is not apparent until after the equipment is uncrated. The carrier should arrange an inspection. Be certain to hold all contents plus all packing material. Under no circumstances should a damaged appliance be returned to the manufacturer without prior notice and written authorization.

A.2 TECHNICAL DATA

A.2.1MATERIALSANDFLUIDSUSED

All areas designed to come into contact with food are in steel or covered in non-toxic plastic material. An HFC refrigerant, in compliance with current legal standards, is used in the refrig- erating units. The type of refrigerant gas used is stated on the data plate.

A.2.2 DIMENSIONS, PERFORMANCE AND CONSUMPTION

Refrigerator model 171.71 gallons / 650 litres (1 fully-insulat- ed door, 1 fully-insulated door "energy saving", 2 ½ fully-

insulated doors)
Gross capacity	171.71 gallons	650 litres
External dimensions:
- Width	23.62"	600	mm
- Depth with door closed	26.18"	665	mm
- Depth with door open	47.24"	1200	mm
- Height	83.15"	2112	mm

For models:

RH06RE1FEU, RH06FE1FEU, RH14RE2FEU, RH14FE2FEU, RH14DD2FU, RH14DFD2FU, RH14DD3U, RH14DFD3U, RH06RE2HU,RH06FE2HU,RH14RE4HU,RH14FE4HU.

Compartment dimensions:
- Width	21.26"	540	mm
- Depth	21.65"	550	mm
- Height	58.42"	1484	mm
Rack dimensions	20.87"x15.75"	530x400	mm

A.1.5CUSTOMER’SRESPONSIBILITIES

A fused disconnect switch or a main circuit breaker (customer furnished) MUST be installed in the electric supply line for the appliance. It is recommended that this switch/circuit breaker have lockout/tagout capability. Before making any electrical connections to this appliance, check that the power supply is adequate for the voltage, amperage, and phase requirements on the rating plate. The customer also must provide a grounded electrical line cord of suitable capacity for the input specified on the data plate.

36

Power supply		120V single-phase
60Hz
Internal temp. range	28°F/50°F	-2°C/+10°C
Max. room temp.	+109.4°F	+43°C
Current absorbed (°)		6 A
Refrigerant charge R134a	0.529 lbs	240 g
Refrigerant capacity(R134a) (¹)		396 W
Refrigerant capacity(R134a) (²)		841 W

No. and type of defrosts (*)min. 1 every 24 hours x max. 30'

(°) At room temperature 104°F/40°C.

(¹)At room temperature 89.6°F/32°C, dew point 131°F/+55°C and evaporation temperature 14°F/-10°C.