1.Remove the plug from the power socket.
2.Open the door of the freezer. Loosen the hinge.
2
1
3
3.Remove the doors by pulling them slightly and remove the hinge.
4.On the opposite side, remove the hole covers.
5.Unscrew both adjusta- ble feet and the screws of the bottom door hinge.
Remove the bottom door hinge and install it on the opposite side.
6.Unscrew the bottom far side screw and install on the opposite side.
10.On the opposite site, install the hole covers.
1)If foreseen
|
| 2 |
|
| 3 |
|
| 1 |
7. Unscrew the top door | 8. Screw the pin back on | 9. Fit the doors into the |
holding pin. | the other side. | pins and install the doors. |
|
| Install the hinge. |
11. Tighten the hinge. | 12. Remove and install | 13. Reposition, level the |
Make sure that the doors | the handle1) | appliance, wait for at least |
are aligned. |
| four hours and then con- |
|
| nect it to the power sock- |
|
| et. |
Do a final check to make sure that:
•All screws are tightened.
•The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket.
In case you do not want to carry out the above men- tioned operations, contact the nearest After Sales Serv- ice Force. The After Sales Service specialist will carry out the reversibility of the doors at your cost.
11
