Wash the outer cabinet with warm soapy water. Remove the ventilation grille (see the section "Removing the ventilation grille") and
When moving the cabinet, lift it by the front edge to avoid scratching the floor.
Servicing and cleaning the water dispenser.
Never use cleaning agents with a grinding or aggressive effect.
When necessary, clean the surfaces of the dispenser and the water container that are accessible from the outside, using only a soft cloth and warm water. The dispenser drip bowl can be cleaned with a tepid solution of washing up liquid.
If the system is not be used for a long period turn off the water connection to the refrigerator. A filter that has been in service shall not be exposed to temperatures below 0 °C as cracking of the filter body may occur due to freezing expansion.
If the filter still is to be preserved for later reuse, suitable storage temperature will be +5 °C.
When the refrigerator is to be used again, rinse the system through thoroughly by draining off at least three litres (5 pints) of water.
If necessary, all systems containing water must be sanitized by ordering the necessary sanitizing kit through Electrolux Service Force Centre
(tel: +44 8705 929 929) or through our website www.electrolux.co.uk.
Service during operation
The water filter is replaced as follows:
Place a piece of kitchen tissue or a dishcloth in the space under the filter. Remove the filter by turning it clockwise. A small amount of water will run out. Dry off and fit the new filter.
See the section "When starting the water system for the first time".
The water connection does not need to be switched off when changing the filter.
Replacement filters can be ordered from Electrolux Service Force Centre. See the section "Service and replacement parts".
14AEG/Electrolux
