Installation
10
Unscrew the adjustable feet
situated on both sides (2
pieces), in addition the
screws fixing the lower door
holders (3 pieces)
respectively the screw on the
other side.
Take off the freezer door by
pulling it slightly downwards.
Unscrew the top door hinge
pin of the refrigerator then
screw it back on the other
side.
Fit the freezer door on the
upper door hinge pin.
Put over the pin in the lower
door holding plate in the
direction of the arrow.
Fix the plate on the other
side leaving the position of
the door unchanged.
Then screw in the one screw
in the place set free on the
other side as well as the
adjustable feet (2 pieces)
and set up the box.
Put the handles on the other side and put the plastic covering nails supplied
in the plastic bag of this instruction book into the holes set free.
Put the appliance into it’s place, set it level and plug it into the mains socket.