Installation
Your Refrigerator Needs Air
For correct operation this
appliance must be located in a dry atmosphere, away from
heat sources, e.g. cookers, radiators, boilers and direct
sunlight.
You should also ensure that air
can circulate freely around the back and the top of the
cabinet. There should be
100mm (4”) between the top of the cabinet and any
overhanging kitchen furniture.
Alternatively allow 50mm (2”) between the top of the cabinet and any overhanging kitchen furniture and a gap of 25mm (1”) on either side of the appliance.
Levelling
The appliance must be level. Level the appliance by adjusting the two adjustable feet (1) at the front of the appliance.
If required the washer (2) can be removed.
2 |
1 |
Reversing the Door
The side at which the door opens can be changed from the right side (as supplied) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the appliance must not be connected to the mains. Remove plug from the mains beforehand.
Carefully tilt the appliance to the back and place an adequate
object under it.
Take care to avoid the compressor or the condenser touching the ground.
9
