Electrolux S 75358 KG3 manual

handle bracket from the door (3) and screw onto the bottom righthand side of the door

(4). (fig.5)

15.Turn the handle bracket with the handle rod 180° and screw them to the door (5) and the fitted handle bracket (6). (fig.5) Do not over- tighten the screw (max. 2 Nm) as you may damage the door handles.

16.Replace the (u, v) door devices on the oppo- site side of the other door after turning them, then fix them by screwing the (s) screw.

17.Replace the (t, z) plugs on the opposite side.

18.Fit the pin of the double door hinge (m) into the left drill of the freezer door. (fig. 2)

19.Fit the freezer door to the lower door hinge pin (f). (fig. 4)

20.Fit the refrigerator door to the upper door hinge pin (d) then slightly tilting both doors fit the pin of the double door hinge (m) into the left drill of the refrigerator door.

21.Opening both doors fix the double door hinge onto the left side using the screws (2 pieces) (c). Do not forget to replace the plas- tic spacer (b) under the hinge. Be careful that the door edges are parallel with the edge of the mantle.

22.Put the appliance to its place, set it level, and reconnect the appliance for the mains supply.

In case you do not want to perform the pro- cedures above, call the nearest brand-mark service. Technicians will make a charge for door reversal.

11