10
Changing over the freezer compartment door
Open the freezer compartment door a little way.
Using a small screwdriver, press the
spring in the opening of the lower
door bearing slightly upwards and take
the door bearing out complete
with the door.
Position the covering cap (M) on
the opposite side.
Turn the freezer compartment door
through 180° and fit the lower door
bearing into the lower bearing
cavity of the freezer compartment
door.
Lift the freezer compartment door
a little way upwards, fit it into the
upper door bearing, and at the
same time insert the lower door bearing into the square hole.
Small upwards and downwards adjustments of the freezer compart-
ment door will make fitting easier.
Building the appliance in under a worktop
The dimensions of the recessed
installation area must correspond
with those indicated in the figure.
☞
☞
☞
☞
☞
☞
AEG43
M
600
550
min.
600