Electrolux SANTO 1454-6 iU installation instructions

•Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components and there is a danger of an electrical shock. Hot vapours can lead to the damage of plastic parts.

•The appliance must be dry before it is placed back into service.

Important!

•Ethereal oils and organic solvents can attack plastic parts, e.g.

–lemon juice or the juice from orange peals;

–butyric acid;

–cleansers which contain acetic acid.

Do not allow such substances to come into contact with appliance parts.

• Do not use any abrasive cleansers.

☞Remove frozen food and the food from the refrigerator. Wrap frozen food in several layers of newspaper. Store it in a cool place, well cov- ered.

☞Defrost the freezer compartment prior to cleaning (see “Defrosting” section).

☞Switch the appliance off and remove the plug from the mains, or dis- connect from the electricity supply.

☞Clean the appliance and the interior accessories with a cloth and luke- warm water. Commercially available dish washing detergents may also be used.

☞After cleaning wipe with fresh water and rub dry.

An accumulation of dust will affect

the performance of the appliance and
cause excessive electricity consump-
tion. The structure of the appliance
permits you to clean the rear zone	3 2 1
close to the wall, using a vacuum
cleaner.

☞Remove the plinth (1), then the venti- lation grid (2);

☞Carefully pull the air deflector out (3), checking that there is no water left

☞	from the defrosting.
	Check the water drain hole (F) under
	the vegetable drawers of the fridge is
	not blocked. Clear a blocked drain hole
	with the aid of the green peg (P) in the	P	F
	pack of accessories included with the
☞	appliance.
	After everything is dry place appliance
22	back into service.