23
Open the appliance door and the
furniture door at 90¡. Insert the
small square (B) into guide (A).
Put together the appliance door
and the furniture door and mark
the holes as indicated in the figu-
re. Remove the squares and drill
holes with ¿ 2 mm at 8 mm from
the outer edge of the door. Place
the small square on the guide
again and fix it with the screws
supplied.
8mm
PR167
AB
PR168
At the end of installation adjusting,
it is necessary to check if the door
of the furniture closes properly.
Should the lining up of the furnitu-
re door be necessary, use the
clearance of slots.
PR167/1
D
B
Fix cover (D) on guide (B) until it
clips into place.