Reversing the Doors
Before carrying out any operations, remove the plug from the power socket. To reverse the door, proceed as follows:
1.Remove the upper hinge and the upper support taking care that the upper door not fall off ;
2.remove the upper door;
3.unscrew the middle hinge. Unscrew the plastic plugs located on the opposite side of the central hinge and insert them into the holes occupied before by the
hinge;
4. remove the lower door;
5. pull off the ventilation grill which is fixed by two screws;
6.remove the bottom hinge by unscrewing its fixing screws;
7.using a 10 mm spanner, unscrew the hinge pin and reassemble it on the opposite side of the hinge;
8. adjust the level of the appliance by unscrewing the adjustable foot, or feet, at the bottom of the cabinet using your fingers or a tool;
9. reassemble the lower hinge on the opposite side, using the screws previously removed. Slide the hole
cover out of the ventilation grill by pushing it in the direction of the arrow and reassemble it on the opposi-
te side; 10. refit the ventilation grill , fixing the screws;
11. reassemble the lower door; 12. reassemble the middle hinge on the opposite side; 13. replace the upper door. 14. In your documentation bag you will find the upper
hinge and the upper support necessary to make the reversibility. Please mount them in their relevant place.
15. Depending on the model:
Model with bar handle
Dismantle the handles and reassemble them on the opposite side. Cover the- holes with the plastic lids that were situated where the handles are presently
23
