#Whenthe rear output setting is S.W, you can-
notoperate the following procedure.
3 Touchcor dnext to PREOUT to switch
thesubwoofer output or rear output.
Touchingcor dwill switch between S.W and
REARand that status will be displayed.
Notes
!Evenif you change this setting, there is no
outputunless you turn the subwoofer output
on(refer to Using subwoofer output on page
36).
!Ifyou change this setting, subwoofer output
inthe audio menu return to the factory set-
tings.
!Bothrear speaker lead outputs and RCA rear
outputare switched simultaneously in this
setting.
Changing languages for CAUTION
Someoperations on this unit are prohibited
whiledriving or needs to be paid a careful at-
tentionwhen operating. In such case, a cau-
tionappears on the display. You can change
thelanguage of the cautions at this setting.
%TouchCAUTION LANGUAGE on the in-
itialmenu to select yourdesired language.
Eachtime you touch CAUTION LANGUAGE it
selectslanguages for CAUTION in the follow-
ingorder:
ENGLISH—ESPAÑOL—FRANÇAIS
Switching the sound muting/attenuation
Soundfrom this system is muted or attenu-
atedautomatically when the signal from the
equipmentwith mute function is received.
!Soundfrom this system returns to normal
whenthe muting or attenuation is can-
celed.
%TouchTEL to select any of the muting,
attenuationor off.
TouchTEL until the desired setting appears in
thedisplay.
!MUTE–Muting
!ATT-20dB–Attenuation (ATT -20dB has a
strongereffect than ATT-10dB)
!ATT-10dB–Attenuation
!OFF–Turn the sound muting/attenuation
off
Notes
!Thesound is turned off, MUTE is displayed
andno audio adjustments are possible.
!Thesound is attenuated, AT T isdisplayed and
noaudio adjustments, except volume control,
arepossible.
!Operationreturns to normal when the phone
connectionis ended.
Switching the warning tone
Ifthe front panel is not detached from the
headunit within four seconds of turning off
theignition, a warning tone sounds. You can
turnoff the warning tone.
1 TouchNEXT on the initial menu.
2 TouchDT.WARNINGto turn war ning
toneon.
#Toturn warning tone off, touch DT.WARNING
again.
Entering PIN code for Bluetoothwireless connection
Toconnect your cellular phone to this unit via
Bluetoothwireless technology, you need to
enterPIN code on your phone to verify the
connection.The default code is 0000, but you
canchange this in this function.
!Withsome Bluetooth audio players, you
maybe required to enter the Bluetooth
audioplayer PIN code in advance to set
thisunit for a connection.
Operating this unit
En
42
Section
03