![](/images/new-backgrounds/1289270/289270149x1.webp)
|
| Section |
Available accessories | 04 | |
|
|
|
Note | 2 Touch SLA on the DSP function menu. | |
|
|
When you make adjustments to the listening po- sition, the speaker outputs are automatically set for appropriate levels. You can tailor the levels more precisely referring to Adjusting the speaker output levels using a test tone or Adjusting the speaker output levels.
Using balance adjustment
You can change the fader/balance setting so that it can provide the ideal listening environ- ment in all occupied seats.
1Touch FADER/BALANCE on the DSP function menu.
2Touch a or b to adjust front/rear speaker balance.
Each time you touch a or b it moves the front/rear speaker balance towards the front or the rear.
FRONT:25 to REAR:25 is displayed as the front/rear speaker balance moves from front to
rear.
# FR: 0 is the proper setting when only two speakers are used.
3Touch c or d to adjust left/right speak- er balance.
Each time you touch c or d it moves the left/ right speaker balance towards the left or the right.
LEFT:25 to RIGHT:25 is displayed as the left/ right speaker balance moves from left to right.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of each source to prevent ra- dical changes in volume when switching be- tween sources.
!Settings are based on the FM volume level, which remains unchanged.
1Compare the FM volume level with the level of the source you wish to adjust.
3Touch c or d to adjust the source vo- lume.
Each time you touch c or d it increases or de- creases the source volume.
+4 to
Notes
!The AM volume level can also be adjusted with source level adjustments.
!Video CD, CD, compressed audio and DivX are set to the same source level adjustment volume automatically.
!DVD and the optional DVD player are set to the same source level adjustment volume automatically.
!External unit 1 and external unit 2 are set to the same source level adjustment volume automatically.
!AUX (auxiliary input) and AV (AV input) are set to the same source level adjustment volume automatically.
Using the dynamic range control
The dynamic range refers to the difference be- tween the largest and softest sounds. The dy- namic range control compresses this difference so that you can clearly hear sounds even at low volume levels.
!The dynamic range control is effective only on Dolby Digital sounds.
!When playing other than the DVD disc, you cannot switch to
DYNAMIC RANGE CONTROL.
1Touch DYNAMIC RANGE CONTROL on the DSP function menu.
2Touch d to turn the dynamic range con-
trol on.
# To turn dynamic range control off, touch c.
Available accessories
En 75