Pioneer AVH-P5000DVD Using the equalizer, Recalling equalizer curves, Adjusting equalizer curves

				Section
	Operating this unit		03
1 Touch FADER/BALANCE on the audio
		FLAT	Flat
function menu.

#When the rear output setting is S.W, BALANCE will be displayed instead of FADER/BALANCE. Refer to Setting the rear output and subwoofer controller on page 41.

2Touch a or b to adjust front/rear speaker balance.

Each time you touch a or b it moves the front/rear speaker balance towards the front or the rear.

FRONT:15 to REAR:15 is displayed as the front/rear speaker balance moves from front to

rear.

# FR: 0 is the proper setting when only two

speakers are used.

# When the rear output setting is S.W, you can- not adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 41.

3Touch c or d to adjust left/right speak- er balance.

Each time you touch c or d it moves the left/ right speaker balance towards the left or the right.

LEFT:15 to RIGHT:15 is displayed as the left/ right speaker balance moves from left to right.

Using the equalizer

The equalizer lets you adjust the equalization to match the car’s interior acoustic character- istics as desired.

Recalling equalizer curves

There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves.

Display Equalizer curve

POWERFUL Powerful

NATURAL Natural

VOCAL Vocal

CUSTOM Custom

SUPER BASS Super bass

!CUSTOM is an adjusted equalizer curve that you create. If you make adjustments to an equalizer curve, the equalizer curve set- ting is memorized in CUSTOM.

!When FLAT is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve.

%Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol- lowing equalizers:

POWERFUL—NATURAL—VOCAL—CUSTOM

—FLAT—SUPER BASS

Adjusting equalizer curves

You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (LOW/MID/HIGH).

!The actual range of the adjustments are dif- ferent depending on which equalizer curve is selected.

Level (dB)

Q=2N Q=2W

Center frequency Frequency (Hz)

1Touch PARAMETRIC EQ on the audio function menu.

2Touch c or d next to EQ SELECT to se- lect an equalizer curve.

POWERFUL—NATURAL—VOCAL—CUSTOM

—FLAT—SUPER BASS

3Touch c or d next to BAND to select the equalizer band to adjust.

LOW (low)—MID (mid)—HIGH (high)

Operating this unit

En 35