Pioneer AVH-P5000DVD operation manual Setting the angle icon display, Setting the aspect ratio

	Section
Operating this unit	03

Setting the angle icon display

You can set it up so that the angle icon ap- pears on scenes where the angle can be switched.

!Initially, this function is set to on.

%Touch MULTI ANGLE on the DVD setup

menu to turn angle icon display on.

# To turn the angle icon display off, touch MULTI ANGLE again.

Setting the aspect ratio

There are two kinds of display. A wide screen display has a width-to-height ratio (TV aspect) of 16:9, while a regular display has a TV aspect of 4:3. Be sure to select the correct TV aspect for the display connected to REAR MONITOR OUTPUT.

!When using a regular display, select either LETTER BOX or PAN SCAN. Selecting

16 : 9 may result in an unnatural picture.

!If you select the TV aspect, the unit’s dis- play changes to the same setting.

%Touch TV ASPECT on the DVD setup menu to select the TV aspect.

Touch TV ASPECT repeatedly until the desired TV aspect appears in the display.

!16 : 9 – Wide screen picture (16:9) is dis- played as it is (initial setting)

!LETTER BOX – The picture is the shape of a letterbox with black bands at the top and bottom of the screen

!PAN SCAN – The picture is cut short at the right and left of the screen

Notes

!When playing discs that do not specify PAN SCAN, playback is with LETTER BOX even if you select PAN SCAN setting. Confirm whether the disc package bears the 16 : 9 LB mark. (See page 13.)

!Some discs do not enable changing of the TV aspect. For details, refer to the disc’s instruc- tions.

Setting the parental lock

Some DVD video discs let you use parental lock to restrict children from viewing violent and adult-oriented scenes. You can set the par- ental lock to your desired level.

!When you set a parental lock level and then play a disc featuring parental lock, code number input indications may be dis- played. In this case, playback will begin when the correct code number is input.

Setting the code number and level

You need to have registered a code number for playing back discs with parantal lock.

1Touch NEXT on the DVD setup menu.

2Touch PARENTAL.

3Touch 0 to 9 to input a four digit code

number.

# To cancel the inputted numbers, touch C.

4Touch ENTER.

The code number is set, and you can now set the level.

5Touch any of 1 to 8 to select the desired level.

The parental lock level is set.

!LEVEL 8 – Playback of the entire disc is pos- sible (initial setting)

!LEVEL 7 to LEVEL 2 – Playback of discs for children and non-adult-oriented discs is possible

!LEVEL 1 – Playback of discs for children only is possible

Notes

!We recommend to keep a record of your code number in case you forget it.

!The parental lock level is recorded on the disc. Look for the level indication written at the disc package, included literature or on the disc it- self. Parental lock of this unit is not possible if a parental lock level is not recorded in the disc.

Operating this unit

En 39