6 Touchbto select DIMENSION and then
touchcor dto adjust front/surround
speakerbalance.
Eachtime you touch cor dit moves the
soundtowards the front or the surrounds.
+3to –3is displayed as the front/surround
speakerbalance moves from front to sur-
rounds.
7 Touchbto select CENTER WIDTH and
thentouch cor dto adjust the center
image.
Eachtime you touch cor dit gradually
spreadsthe center channel sound into the
frontleft and right speakers over a range 0to
7.
3isthe default and it’s recommended for
mostrecordings. 0places all center sound in
thecenter speaker. 7places all center sound
equallyin the left/right speakers.
Setting the speaker setting
Youneed to make with/without (or yes/no) and
size(bass reproducing capacity) selection/ad-
justmentsdepending on the installed speak-
ers.The size needs to be set to LARGE (large)
ifthe speaker is capable of reproducing
soundsof about 100 Hz or below. Otherwise
selectSMALL (small).
!Lowfrequency range is not output if the
subwooferis set to OFF and the front and
rearspeakers set to SMALL or OFF.
!Itis imperative that non-installed speakers
beset to OFF.
!Setthe front or rear speaker to LARGE if
thespeaker is capable of reproducing bass
content,or if no subwoofer is installed.
1 TouchNEXT on the DSP function menu.
2 TouchSPEAKER SETTING.
3 Touchaor bto select the speaker to
beadjusted.
Eachtime you touch aor bselects the speak-
erin the following order:
FRONT(front speakers)—CENTER (center
speaker)—REAR(rear speakers)—
SUBWOOFER (subwoofer)—PHASE (subwoo-
fersetting)
#Youcan switch to PHASE only when the sub-
wooferhas been set to ON.
4 Touchcor dto select the correct size
forthe selected speaker.
Eachtime you touch cor dselects the size in
thefollowing order:
OFF(off)—SMALL (small)—LARGE (large)
#Youcannot select OFF, when FRONT (front
speakers)have been selected.
#Youcan select ON or OFF, when
SUBWOOFER (subwoofer) has been selected.
#Youcan switch REVERSE (reverse phase) or
NORMAL(normal phase), when PHASE (subwoo-
fersetting) has been selected.

Correctingthe subwoofer’s phase

Iftr ying to boost the bass output of the sub-
wooferdoesn’t do much or rather makes you
feelthat the bass gets more murky, this may
indicatethat the subwoofer ’s output and bass
contentyou hear over other speakers cancel
eachother out. To remove this problem, try
changingthe phase setting for the subwoofer.
1 TouchNEXT on the DSP function menu.
2 TouchSPEAKER SETTING.
3 Touchaor bto select SUB WOOFER
(subwoofer).
Eachtime you touch aor bselects the speak-
erin the following order:
FRONT(front speakers)—CENTER (center
speaker)—REAR(rear speakers)—
SUBWOOFER (subwoofer)—PHASE (subwoo-
fersetting)
4 Touchdto turn subwoofer output on.
#Toturn subwoofer output off, touch c.
5 Touchband then touch cor dto se-
lectthe phase of subwoofer output.
Touchdto select normal phase and
NORMALappears in the display. Touch cto
selectreverse phase and REVERSE appears in
thedisplay.
Available accessories
En 77
Section
04
Availableaccessories