iPodis not charged but operates
correctly
Checkif the connection cable for iPod
shortedout (e.g., not caught in metal ob-
jects).After checking, turn the ignition switch
OFFand back ON ordisconnect the iPodand
connectagain.
Errorhas occurred when connect-
ingthe iPod to this unit
Reconnectthe iPod.
Turnthe ignition switch to OFF,then to ACC
orON.
Updatethe iPod version.
Understanding auto TAand EQ error messages

Whencorrect measurement of car interior acoustic characteristics is not possible using the auto

TAand EQ, an error message may appear on the display. If an error message appears, refer to the

tablebelow to see what the problem is and the suggested method of correcting the problem. After

checking,try again.

Message Cause Action
Error.Please check MIC. Microphoneis not connected. Plugthe supplied microphone securely into
thejack.
Error.Please check front SP.,
Error.Please check FL SP.,
Error.Please check FR SP.,
Error.Please check center SP.,
Error.Please check rear SP.,
Error.Please check RL SP.,
Error.Please check RR SP.,
Error.Please check subwoofer
Themicrophone cannot pick up the
measuringtone of a speaker.
!Confirmthat the speakers are connected
correctly.
!Correctthe input level setting of the power
ampconnected to the speakers.
!Setthe microphone correctly.
Error.Please check noise. Thesurroundingnoise level is too
high.
!Stopyour car in a place that is as quiet as
possible,and switch off the engine, air condi-
tioneror heater.
!Setthe microphone correctly.
Additional Information
En
88
Appendix