Section

Available accessories

04

 

 

2Touch BSSM on the function menu to turn BSSM on.

BSSM begins to flash. While BSSM is flashing the 12 strongest broadcast stations will be stored in order from the lowest channel up.

When finished, BSSM stops flashing.

# To cancel the storage process, touch BSSM again.

3Touch ESC to return to the TV picture.

# To return to the previous display, touch BACK.

Note

Storing broadcast stations with BSSM may re- place broadcast stations you have saved using P01 to P12.

Digital Signal Processor

Introduction of DSP adjustments

You can use this unit to control multi-channel processor (e.g. DEQ-P8000), which is sold sepa- rately.

!Some functions may differ depending on the multi-channel processor connected to this unit.

Important

When a multi-channel processor and an optional DVD player are connected to this unit, be sure to use an optical cable (e.g., CD-AD600).

1DSP display

Shows the DSP function names.

By carrying out the following settings/adjust- ments in the order shown, you can create a fi- nely-tuned sound field effortlessly.

1Setting the speaker setting

2Using the position selector

3Auto TA and EQ (auto-time alignment and auto- equalizing)

4Adjusting the time alignment

5Adjusting the speaker output levels using a test tone

6Selecting a cross-over frequency

7Adjusting the speaker output levels

8Adjusting 3-band parametric equalizer

1Touch AV MENU and then touch DSP MENU to display the DSP function names.

The DSP function names are displayed and operable ones are highlighted.

Available accessories

En 73

Page 73
Image 73
Pioneer AVH-P5000DVD operation manual Digital Signal Processor, Introduction of DSP adjustments