Pioneer AVH-P5000DVD Operating this unit Initial Settings, Adjusting initial settings

	Section
Operating this unit	03

Initial Settings

Adjusting initial settings

Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit.

1Function display

Shows the function names.

Switching the auxiliary 1 setting

%Touch AUX1 on the initial menu to se- lect desired setting.

!VIDEO – an iPod with video capabilities connected with 4-pole mini plug cable (e.g., CD-V150M)

!AUDIO – auxiliary device connected with stereo mini plug cable

!OFF – No auxiliary device is connected

Switching the auxiliary 2 setting

%Touch AUX2 on the initial menu to turn

auxiliary 2 setting on.

# To turn auxiliary 2 setting off, touch AUX2 again.

Operating this unit

1Touch the source icon and then touch OFF to turn this unit off.

2Touch the screen to display the touch panel keys.

3Touch AV MENU and then touch INITIAL MENU to display the function names.

The function names are displayed and oper-

able ones are highlighted.

# To go to the next group of function names,

touch NEXT.

# To return to the previous group of function names, touch PREV.

4Touch ESC to return to the ordinary dis-

play.

# To return to the previous display, touch BACK.

Setting the rear output and subwoofer controller

This unit’s rear output (rear speaker leads out- put and RCA rear output) can be used for full- range speaker (FULL) or subwoofer (S.W) con- nection. If you switch the rear output setting to S.W, you can connect a rear speaker lead directly to a subwoofer without using an auxili- ary amp.

Initially, the unit is set for rear full-range speak- er connection (FULL). When rear output is connected to full range speakers (when FULL is selected), you can connect other full range speakers (REAR) or a subwoofer (S.W) to the RCA rear output.

!When the multi-channel processor (e.g., DEQ-P8000) is connected to this unit, you cannot operate this function.

1 Touch REAR SP on the initial menu.

Switching the auxiliary setting

Auxiliary devices connected to this unit can be activated individually. Set each AUX source to ON when using. For more information about connecting or using auxiliary devices, refer to Using the AUX source on page 48.

2Touch c or d next to REAR SP to switch the rear output setting.

Touch c to select full-range speaker and FULL appears in the display. Touch d to select sub-

woofer and S.W appears in the display.

# When no subwoofer is connected to the rear

output, select FULL (full-range speaker).

# When a subwoofer is connected to the rear output, select S.W (subwoofer).

En 41