Runco DTV-992 manual Start Up of the Adjustment Mode

Start Up of the Adjustment Mode

RANDOM ACCESS - Random Access should be selected if the user intends to make only a few adjustments.

SERVICE - Service should be selected if the user intends to delete blocks, change password or apply information.

EYE-Q- This selection will only be available when the subconvergence unit EYE-Q is connected to the projector.

While in Guided or Random Access adjustment Mode, the user may use an external source, an internally generated genlocked pattern or an internally gen- erated multifrequency cross hatch pattern as a setup pattern. Some items in the Adjustment mode are password protected. While selecting such an item, the projector asks you to enter your password. (Password protection is only avail- able when the password DIP switch on the controller module is in the ON posi- tion. Contact a RUNCO authorized technician when no password is requested during the adjustment procedure and password protection is desired.)

Your password contains 4 digits.

a) Adjusting the projector with the RCU.

Enter the digits with the numeric keys on the RCU.

Example : 2 3 1 9

For each digit entered, a ‘X’ appears on the screen under the displayed text ‘enter password’

When your password is correct, you get access to the ‘Adjustment mode’. When the entered password is wrong, the message ‘Wrong password !!!’ will be dis- played. The projector stays on the previous selected item.

Factory programmed password : 0000

ADJUSTMENT MODE

Select a path from below :

GUIDED

RANDOM ACCESS

INSTALLATION

SERVICE

EYE-Q

Source 1

Select with or then <ENTER> <EXIT> to return

enter password

X X X X

wrong password

b) adjusting the projector with the local keypad.

When the ‘compose password’ menu is displayed, select with control disc the first digit of your password and press ENTER. Continue by selecting the second digit with the control disc and press ENTER. Handle in the same way for the third and fourth digit.

When your password is correct, you get access to the ‘Adjustment mode’.

When the entered password is wrong, the message ‘Wrong password’ will be displayed.

Once the password is correctly entered, all other password protected items are accessible without re-entering your password.

When re-entering the adjustment mode, it will be necessary to enter your pass- word again when selecting a password protected item.

COMPOSE
PASSWORD
	???
7	8	9
4	5	6
1	2	3
	0
Select with		,
		or
then <ENTER>
<EXIT> to return

5-2