7-5
Service Mode
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with
then <ENTER>
<EXIT> to return.
or
ALL SETTINGS TO MIDPOS
All settings to midposition
Item is password protected.
Highlight ‘All settings to midposition’ with the control disc and press
ENTER to set all settings to their midposition.
A confirmation menu will be displayed first.
ENTER will set all settings to their midposition. EXIT cancel the operation
to set all settings to their midposition.
Undo all settings to midpos
When “all settings to midpos” is selected, all settings are set to their mid-
position. To cancel this action, select ‘Undo all settings to midpos’ by push-
ing the control disc up or down and press ENTER. ‘Undo all settings to
Midposition’ is displayed in the Memory management menu instead of ‘All
settings to midposition’ when this latter is pressed.
An undo is possible as long as the projector is playing on the same source
(= same adjustment block) even when some adjustments as geometry or
convergence are already readjusted. When undo is pressed all settings are
reset to the previous settings.
R & B convergence mid
Item is password protected.
Highlight ‘R & B convergence mid’ with the control disc and press ENTER
to set all convergence settings to their midposition. A confirmation screen
will be displayed first.
ENTER sets the convergence settings to their midposition. EXIT cancels
the procedure to set the convergence settings to their midposition.
Undo R & B convergence mid
When “R & B convergence mid” is selected, all convergence settings are
set to their midposition. To cancel this action, select ‘Undo R & B conver-
gence mid’ by pushing the control disc up or down and press ENTER.
‘Undo R & B convergence mid’ is displayed in the Memory management
menu instead of ‘R & B convergence mid’ when this latter is pressed.
An undo is possible as long as the projector is playing on the same source
(= same adjustment block) even when some adjustments are already read-
justed. When undo is pressed all settings are reset to the previous settings.
ENTER displays a Confirmation screen.
EXIT returns to the Service menu.
SET TO MIDPOSITION
All settings
on current block
will be overwritten !
<ENTER> to confirm
<EXIT> to cancel
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with
then <ENTER>
<EXIT> to return.
or
UNDO ALL SETTINGS TO MIDPOS
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
GR CONVERGENCE MID
Select with
then <ENTER>
<EXIT> to return.
or
R & B CONVERGENCE MID
R & B CONVERGENCE MID
Convergence settings
in current block
will be overwritten !
<ENTER> to confirm
<EXIT> to cancel