Runco DTV-992 manual Centering the Camera Horizontally

Appendix 2

CENTERING THE CAMERA

The camera must be centered in middle of the projection screen. Follow the steps described below:

Highlight CENTER CAMERA by pushing the up or down keys of the control disc.

Press the <ENTER> button to start up the process.

Note: It is critical that the green raster of the presently select- ed source is centered on the CRT faceplate. Other- wise, the camera will not be centered properly.

EYE-Q

TOUCH UP

AUTOCONVERGENCE

QUICK AUTOPICTURE

FULL AUTOPICTURE

EYE-Q SETUP

EYE-Q DIAGNOSTICS

EYE-Q SETUP

FOCUS THE LENS

CENTER THE CAMERA

CONFIGURATION: rear/front

LEARN REFERENCE

TOUCH-UP OPTIONS:

Select with or then <ENTER>.

<EXIT> to return

CENTERING THE CAMERA HORIZONTALLY

One vertically centered green bar will be projected onto the screen, together with a text box. Inside the box, the text of “CAMERA ALIGNMENT HORIZONTAL” indicates the item subject to adjustment and a symmetrical bar scale (from -50 to +50) under text.

If the indicated value below the bar scale is not equal to zero (i.e. the black highlight is not in the middle of the bar scale), the camera is not centered horizontally. Follow the steps below to center the camera horizontally:

Turn the knob situated on the upper-right corner of the cam- era clockwise or counter clockwise until the highlight is in the middle of the bar scale (i.e. the indicated value becomes zero);

Press the <ENTER> button to continue with the camera ver- tical centering.

Note: An easy way to remember the H+V adjustments is: The knob located up/down from the fixed screw is ver- tical adjustment. The knob located left/right from the fixed screw is horizontal adjustment.

CAMERA

ALIGNMENT

HORIZONTAL

+00

Fixed screw

No Adjustment

S	8	m
N
E		m
L
V
T
T		m
V
		m
L		8
ENS

Knob for centering

Knob for centering

the camera vertically

the camera horizontally

APX-6