Casio EX-M20 manual Using the Flash

BASIC IMAGE RECORDING

IMPORTANT!

•Zoom is disabled whenever the monitor screen is turned off (page 25).

•Using digital zoom can cause degradation of the recorded image.

•To disable digital zoom, select “Off” for the “Digital Zoom” setting on the “REC” tab.

NOTE

•You can use the key customization feature (page 75) to configure the camera so the digital zoom factor changes whenever you press [ ] and [ ] while in the REC mode.

Using the Flash

Perform the following steps to select the flash mode you want to use.

1.In the REC mode, press [MENU].

2.Use [ ] and [ ] to select the “REC” tab.

3.Use [ ] and [ ] to select “Flash”, and then press [ ].

4.Use [ ] and [ ] to select the flash mode you want, and then press [SET].

To do this:	Select this setting:
Have the flash fire automatically	Auto
when required (Auto Flash)
Turn off the flash (Flash Off)
Always fire the flash (Flash On)
Fire a pre-flash followed by image
recording with flash, reducing the
chance of red-eye in the image (Red-
eye reduction). Have the flash fire
automatically when required.

47