Casio EX-M20 manual Basic Remote Controller Operations, 163

PLAYING AN AUDIO FILE (EX-M20 Only)

Basic Remote Controller Operations

●To start playback

Press the [] button. The remote controller beeps to indicate that playback has started.

•Pressing the [] button while the camera is off turns on power and starts playback.

●To pause playback

Press the [ ] button (remote controller beeps).

Pressing the [] button or the [ ] button resumes playback (remote controller beeps).

•If the Auto Power Off trigger time (about two minutes or five minutes) is reached while playback is paused, the camera will automatically turn off.

●To fast forward the playback

Hold down the [] button for a few seconds until fast forward starts.

●To fast reverse the playback

Hold down the [] button for a few seconds until fast reverse starts.

●To skip to the beginning of the current track Press the [] button (remote controller beeps).

To skip to the beginning of a previous track, press the [] button multiple times (remote controller beeps). The current track number is shown on the LCD.

●To skip to the beginning of the next track

Press the [] button (remote controller beeps).

To keep skipping forward, press the [ ] button multiple times (remote controller beeps). The current track number is shown on the LCD.

●To stop playback

Press the [] button (remote controller beeps).

•Pressing the [] button again will restart playback from the beginning of the track where it was stopped.

●To adjust volume

Press the [+] or [–] volume buttons to adjust volume to the desired level. The LCD shows the current volume level.

●To turn off power

Press the camera’s power button.

•Camera power also turns off automatically if you do not perform an operation for about 10 seconds after playback is stopped.

IMPORTANT!

•The button operation tone does not sound if the camera’s button tone function is turned off (page 111).

•You cannot use fast forward, fast reverse, or skip while the current volume level is shown on the LCD.

163