Casio EX-M20 manual Cropping an Image, Use and to make the cropping boundary smaller or larger

PLAYBACK

Cropping an Image

Use the following procedure when you want to crop a portion of an enlarged image and use the remaining part of the image as an e-mail attachment, Web page image, etc.

1.In the PLAY mode, use [ ] and [ ] to scroll through images and display the one you want to crop.

2.Press [MENU].

3.Select the “PLAY” tab, select “Trimming”, and then press [ ].

•This causes a cropping boundary to appear.

4.Use [ ] and [ ] to make the cropping boundary smaller or larger.

•The size of the cropping boundary depends on the size of the image on the display.

5.When the cropping boundary is the size you want, press [DISP] to lock it.

•After pressing [DISP] to lock the size of the cropping boundary, you can press [DISP] again to unlock it. After that, you can repeat steps 4 and 5 to change the cropping boundary size.

6.Use [ ], [ ], [ ], and [ ] to move the cropping boundary up, down, left, or right until the area of the image you want to extract is within the boundary.

7.Press [SET] to extract the part of the image enclosed in the cropping boundary.

•If you want to cancel the procedure at any point, press [MENU].

83