Casio EX-M20 Other, Power Supply

APPENDIX

185

720 shots (120 minutes)

190 shots (95 minutes)

180 minutes

170 minutes

450 minutes

Number of Shots,Continuous

Recording*1 (Recording Time)

Number of Shots,Normal

Recording*2 (Recording Time)

Continuous Playback*3

(Continuous Snapshot Recording)

Continuous Voice Recording*4

Continuous Audio Playback*5

The above values indicate the amount of time under the conditions defined

below, until power automatically turns off due to battery failure. They do not

guarantee that you will be able to achieve this level of operation. Low

temperatures shorten battery life.

*1 Continuous Recording Conditions

•Temperature: 23°C (73°F)

•Monitor screen: On

•Flash: Off

•Image recorded about every 10 seconds

*2 Normal Recording Conditions

•Temperature: 23°C (73°F)

•Monitor screen: On

•Flash: On (one flash every two shots)

•Image recorded about every 30 seconds

•Power off/on every 10 shots

*3 Continuous Playback Conditions

•Temperature: 23°C (73°F)

•Scroll one image about every 10 seconds

*4 Voice recording times are based on continuous recording.

*5 Audio playback times are based on continuous output (through

headphones).

•Voice recording and audio playback times apply to the EX-M20 only.

Power Consumption......... DC 3.7V Approximately 2.5W

■ Other

Dimensions

EX-S20:........................... 83(W) x 53(H) x 11.3(D) mm

(3.3˝(W) x 2.1˝(H) x 0.44˝(D))

(excluding projections)

EX-M20: ..........................83(W) x 53(H) x 12.4(D) mm

(3.3˝(W) x 2.1˝(H) x 0.49˝(D))

(excluding projections)

Weight

EX-S20:........................... Approximately 78 g (2.8 oz)

(excluding battery and accessories)

EX-M20: ..........................Approximately 80 g (2.8 oz)

(excluding battery and accessories)

Bundled Accessories........Rechargeable lithium ion battery (NP-

20); USB Cradle (CA-23); Special AC

Adaptor (AD-C51G); AC power cord;

Strap; USB cable; LCD Remote

Controller (bundled with EX-M20 only);

Stereo Headphones (bundled with EX-

M20 only); CD-ROM; Basic Reference

■ Power Supply

Power Requirements ........Rechargeable lithium ion battery (NP-

20) x 1

Approximate Battery Life:

Contents

Main Digital Camera E EX-S20/EX-M20 Users Guide K858PCM1DMX INTRODUCTION INTRODUCTION Unpacking Contents 2INTRODUCTION 16 QUICK START GUIDE 20 GETTING READY 43 BASIC IMAGE RECORDING 55 OTHER RECORDING FUNCTIONS 78 PLAYBACK 97 DELETING FILES 99 FILE MANAGEMENT 111 OTHER SETTINGS 125 USING A MEMORY CARD 131 VIEWING IMAGES ON A COMPUTER 145 USING THE CAMERA WITH A COMPUTER 159 PLAYING AN AUDIO FILE (EX-M20 Only) 173 APPENDIX Page Features Page Precautions General Precautions Page Data Error Precautions Operating conditions Condensation Lens Page QUICK START GUIDE First, charge the battery! Page Page Page GETTING READY About This Manual Terminology Button Operations On-screen Text Camera Back Front IHJ Bottom USB Cradle Back Front Monitor Screen Contents REC mode PLAY mode Changing the Contents of the Monitor Screen Indicator Lamps Attaching the Strap Power Requirements To load the battery Page To charge the battery Page If the camera works normally Continue using the camera until the current charge is used up, and then charge the battery. If the camera does not work normally Battery Life Guidelines Tip to Make the Battery Last Longer Low Battery Indicator Power Supply Precautions Battery Handling Precautions Page USB Cradle and AC Adaptor Precautions Turning the Camera On and Off Auto Power Off (APO) Using the On-screen Menus Turn on the camera, and then align the mode selector with (REC) to enter the REC mode. Press [MENU]. Page Perform one of the following operations to apply the setting you configured. Configuring Display Language and Clock Settings To configure display language and clock settings Press the power button to turn on the camera. Use [], [], [], and [] to select the language you want, and then press [SET]. Page Page BASIC IMAGE RECORDING Recording an Image Aiming the Camera Compose the image on the monitor screen. Press the shutter release button to Recording an lmage Press the power button to turn on the camera. Align the mode selector with (REC). About the REC Mode Monitor Screen Recording Precautions Page Using the Flash Use [] and [] to select Flash, and then Use [] and [] to select the flash mode you About Red-eye Reduction Flash Precautions Recording Macro Images Align the Normal ( )/ Macro ( ) selector with . Using the Self-timer Use [] and [] to select Self-timer, and then press []. Use [] and [] to select the self-timer time you want to use, and then press [SET]. Specifying Image Size and Quality To specify the image size Use [] and [] to select Size, and then To specify image quality Page OTHER RECORDING FUNCTIONS Exposure Compensation (EV Shift) Adjusting White Balance Use [] and [] to select the setting you Adjusting White Balance Manually Select the REC tab, select White Balance, and then press []. Use [] and [] to select Manual. Using the BESTSHOT Mode Example Sample Scene Page Page To delete a BESTSHOT user setup Combining Shots of Two People into a Single Image (Coupling Shot) Page Recording a Subject onto an Existing Background Image (Pre-shot) Page Using the Movie Mode Recording Audio (EX-M20 Only) Adding Audio to a Snapshot Page Recording Your Voice Using the Histogram Audio Recording Precautions Page REC Mode Camera Settings Specifying ISO Sensitivity Select the REC tab, select ISO, and then press []. Use [] and [] to select the setting you want and then press [SET]. Turning the On-screen Grid On and Off Turning Image Review On and Off OTHER RECORDING FUNCTIONS Assigning Functions to the [] and [] Keys Select the REC tab, select L/R Key, and then press []. Use [] and [] to select the setting you NOTE The initial default setting is REC Mode. OTHER RECORDING FUNCTIONS Assigning Functions to the [] and [] Keys Select the REC tab, select U/D Key, and then press []. NOTE The initial default setting is Digital Zoom. Specifying Power On Default Settings Select the Memory tab, select the item you want to change, and then press []. Page PLAYBACK Use [] (forward) or [] (back) to scroll through files on the monitor screen. Basic Playback Operation Press the power button to turn on the camera. Align the mode selector with (PLAY). Playing an Audio Snapshot (EX-M20 Only) In the PLAY mode, use [] and [] until the image you want is displayed. Press [SET]. Flipping the Display Zooming the Display Image Resizing an Image Cropping an Image Playing a Movie Page Displaying the Calendar Screen Playing a Slide Show To specify the slideshow images Use [] and [] to select Images, and then Use [] and [] to select Start, and then press [SET]. To specify the slideshow time Selecting a Particular Image for a Slideshow Using the Photo Stand Feature To set the slideshow interval Rotating the Display Image Using Image Roulette Adding Audio to a Snapshot (EX-M20 Only) Page Playing Back a Voice Recording File (EX-M20 Only) In the PLAY mode, use [] and [] to display the voice file (a file with on it) you want to play. Press [SET]. Page DELETING FILES Deleting a Single File Page FILE MANAGEMENT Folders Memory Folders and Files CIMG0026.JPG Page To protect all files in memory DPOF To configure print settings for a single image To configure print settings for all images Exif Print PRINT Image Matching II II Using USB DIRECT-PRINT Press the USB cradle [USB] button. On the cameras monitor screen, use [] and [] to select Print, and then press [SET]. After printing is complete, turn off the camera and remove it from the USB cradle. Using the FAVORITE Folder To copy a file to the FAVORITE folder To display a file in the FAVORITE folder Page Page OTHER SETTINGS Turning the Key Tone On and Off (EX-S20) Configuring Sound Settings (EX-M20) To configure sound settings To set the volume level Specifying an Image for the Startup Screen In the REC mode or the PLAY mode, press [MENU]. Select the Set Up tab, select Startup, and then press []. Use [] and [] to display the image you want to use as the startup image. Use [] and [] to change the setting, and then press [SET]. Configuring Power Down Image Settings To configure power down image settings To cancel Power Down Image settings Specifying the File Name Serial Number Generation Method Page Stopping the Alarm Setting the Clock To select your Home Time zone In the REC mode or the PLAY mode, press [MENU]. Select the Set Up tab, select World Time, and then press []. Page Changing the Date Format Using World Time To display the World Time screen Page Page Changing the Display Language Formatting Built-in Memory Page USING A MEMORY CARD To remove a memory card from the camera Using a Memory Card To insert a memory card into the camera Formatting a Memory Card Memory Card Precautions Copying Files To copy all the files in built-in memory to a memory card Page VIEWING IMAGES ON A COMPUTER Using the Camera with a Windows Page Page 9. 10. After making sure the camera is turned off, place the camera onto the USB cradle. Press the USB cradles [USB] button. 11. 12. 17. 16. 15. USB Connection Precautions Page Page 9. 10. USB Connection Precautions Operations You Can Perform from Your Using a Memory Card to Transfer Images to a Computer Memory Data DCF Protocol Memory Directory Structure Directory Structure Folder and File Contents Built-in Memory and Memory Card Precautions Image Files Supported by the Camera Creating an album USING THE CAMERA WITH A COMPUTER Using the Album Feature Selecting an Album Layout In the PLAY mode, press [MENU]. Select the PLAY tab, select Create Album, and then press []. Use [] and [] to select Layout. Use [] and [] to select the layout you want. Configuring Detailed Album Settings Background Color Album Type Auto Album Creation On/Off Image Use Viewing Album Files Page After you are finished viewing the album, exit your Web browser application. Saving an Album Installing the Software from the CD-ROM About the bundled CD-ROM Computer System Requirements Windows Macintosh Getting Started Selecting a Language On the menu screen, click the tab for the language you want. Installing Software from the CD-ROM in Windows Installing an Application Viewing the Contents of the Read me File User Registration Exiting the Menu Application Viewing User Documentation (PDF Files) To install Photo Loader Installing Software from the CD-ROM on a Macintosh Installing Software Page PLAYING AN AUDIO FILE Transferring Audio Files to the Camera Establish a USB connection between the camera and your computer (page 131). Perform one of the following operations to open camera memory or the memory card. Open the AUDIO folder, and then transfer the MP3 files you want to play into it. Preparing the Camera for Audio Player Operation Using the Camera as an Audio Player General Guide A 78 9 0 4 5 1 2 3 45 1 2 Basic Remote Controller Operations Playing Back Audio Files Specifying the Audio Playback Mode Playing Back Tracks Randomly Page Specifying the Track Playback Sequence AUDIO001.MP3 AUDIO002.MP3 POPS ROCK\ROCK0002.MP3 Example PLAYLIST.TXT File Contents Example Folder Structure Using BASS BOOST Deleting MP3 Files from File Memory Page Disabling Remote Controller Button Operations Deleting All MP3 Files Audio Playback Precautions LCD Remote Control Error Messages APPENDIX Menu Reference REC mode REC tab menu Memory tab menu PLAY mode PLAY tab menu Set Up tab menu Indicator Lamp Reference Operation/Flash charge lamp Camera Indicator Lamps REC Mode PLAY Mode USB Cradle Indicator Lamps [CHARGE] lamp [USB] lamp Troubleshooting Guide Page Page Display Messages Specifications Main Specifications Camera Functions Page Audio Player Function (EX-M20 Only) Other Power Supply Rechargeable Lithium Ion Battery (NP-20) USB Cradle (CA-23) Special AC Adaptor (AD-C51G) LCD Remote Controller (Bundled with EX-M20 Only)