PLAYBACK

IMPORTANT!

Keep the microphone on the front of the camera pointed at the subject.

Take care that you do not

block the microphone with your fingers.

Microphone

Good recording results are not possible when the camera is too far from the subject.

Operating camera buttons during recording can cause button noise to be included in the audio.

The (Audio) icon appears on the monitor screen after audio recording is complete.

You will not be able to record audio when remaining memory capacity is low.

The following types of audio recording are not supported.

Adding audio to a movie image

Adding audio to a protected snapshot (page 100)

Audio that is re-recorded or deleted cannot be recovered. Make sure you no longer need audio before re-recording or deleting it.

Playing Back a Voice Recording File (EX-M20 Only)

Perform the following steps to play back a voice recording file.

1.In the PLAY mode, use [ ] and [ ] to display

the voice file (a file with on it) you want to play.

2.Press [SET].

This starts playback of the voice recording file through the camera’s speaker.

You can perform the following operations while audio is playing.

To do this:

Do this:

 

 

 

 

Fast forward or fast reverse

Hold down [

] or [ ].

the audio

 

 

 

 

 

Pause and unpause audio

Press [SET].

 

playback

 

 

 

 

 

 

Adjust audio volume

Press [ ] or [

].

 

 

Cancel playback

Press [MENU].

 

 

 

95

Page 95
Image 95
Casio manual Playing Back a Voice Recording File EX-M20 Only