Casio EX-M20 manual Press the shutter release button to record the image

OTHER RECORDING FUNCTIONS

1.In the REC mode, press [MENU].

2.Select the “REC” tab, select “REC Mode”, and then press [ ].

3.Use [ ] and [ ] to select “ (+)”, and then press [SET].

•This enters the Snapshot Audio Mode.

4.Press the shutter release button to record the image.

•After the image is recorded, the camera enters audio recording standby, with the image

you just recorded on the	Remaining recording time
monitor screen.

•You can cancel audio recording standby by pressing [MENU].

5.Press the shutter release button to start audio recording.

•The operation/flash charge lamp flashes green as recording is performed.

•Even if you have the monitor screen turned off (page 25), the monitor screen turns on while you are adding audio to a snapshot.

6.Recording stops after about 30 seconds or when you press the shutter release button.

68