Temperature Display

The temperature display can indicate several pieces of information.

During normal operation, the temperature currently present in the refrigerator (ACTUAL temperature) is displayed.

When the temperature is being adjusted a flashing display indicates the fridge compartment temperature currently set (DESIRED temper- ature).

If there is a fault in the appliance the temperature display shows a square or a letter.

ALARM OFF button

With the ALARM OFF button, the acoustic warning signal can be switched off, e.g. the "Open Door" warning when sorting in or out, the food to be chilled.

Prior to Initial Start–Up

1 Before connecting the appliance to the mains and putting it into operation for the first time, leave the appliance to stand for 30 minutes if was transported upright. After transport on its side, the appliance must be left to stand for 2 hours before putting it into operation. This is necessary to allow the refrigerant to flow back into the compressor. Otherwise the compressor may be damaged.

01. Please clean the appliance interior and all accessories prior to initial start-up (see section: “Maintenance and Cleaning”).

2.The appliance must be correctly installed in accordance with the chap- ter "Installation" before it is put into operation for the first time. Care should be especially taken that the mains voltage and frequency avail- able correspond with the appliance’s rating plate.

818 35 73-01/6

17

Page 17
Image 17
Electrolux SANTO 72340 KA operating instructions Prior to Initial Start-Up, Temperature Display, Alarm OFF button