21
Care and cleaning Before cleaning always allow
the appliance to cool down.
Cleaning materials
Before using any cleaning materials
on your appliance, check that they
are suitable and that their use is
recommended by the manufacturer.
Cleaners that contain bleach should
NOT be used as they may dull the
surface finishes. Har sh abrasives
must also be avoided.
Cleaning the outside of the
appliance
Do not use abrasive cleaning
materials e.g. Hob Brite, Brillo pads
or scourers on painted or printed
finishes as damage may occur.
Regularly wipe over the control
panel, doors and appliance sides
using a soft cloth and hot soapy
water. To prevent streaking finish
with a soft cloth.
Stainless Steel cream cleaners are
abrasive and should be a voided as
they may dull the surface finish. Any
spillage on the stainless steel
finish must be wiped off
immediately.
Do not attempt to remove any
of the control knobs from the
appliance as this may cause
damage and is a safety
hazard.
Cleaning the control knobs
and handles
It is strongly recomme nded that only
hot soapy water is used for cleaning
the control knobs and handles. ANY
OTHER CLEANING MATERIALS
MAY DULL THE SURFACE FINISH.