Manuals / Electrolux / Kitchen Appliance / Cooktop

Electrolux SIG 401 Connecting to GAS, Fitting the Battery, Pressure Testing

Models: SIG 401

1 48
Download 48 pages 38.45 Kb
Page 42
Image 42

4. CONNECTING TO GAS

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less that R³/8. Connection is made to the Rc ½ (½"

B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance.

NOTE: ONLY LIQUID SEALANTS TO BE USED WHEN

INLET GAS PIPE IS FITTED TO RESET VALVE I.E.: DO

NOT USE P.T.F.E. SEALANT TAPE.

Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig.3. Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION 250

UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

400 650

Fig.3

5.FITTING THE BATTERY

225

1.

The battery holder is located on the left hand side of the front plinth.

 

2.

To gain access to the battery, open the main oven door and lift up

Fig.4

 

the battery holder lid.

 

3.Fit the new battery ensuring positive (+) terminal is next to the (+) sign on the battery holder. See Fig. 4

4.Close the lid of the battery holder .

6. PRESSURE TESTING

1The oven injector is used as a pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and

remove box front cover. Replace one clip back into the right hand side of the burner box.

Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide burner off injector, whilst easing it forward and taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the appropriate burner. The pressure should be either:-

(i)For Natural Gas 20mbar

(ii)For LP.Gas The pressure must be set to 28 mbar for use on butane or 37 mbar for use on propane.

4.Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the F.S.D. phial is correctly located into the bracket on the burner.

5.Check operation of oven.

42

Page 41 Page 43
Page 42
Image 42
Electrolux SIG 401 installation instructions Connecting to GAS, Fitting the Battery, Pressure Testing
Page 41 Page 43

SIG 401 specifications

The Electrolux SIG 401 is a sophisticated vacuum cleaner designed to deliver exceptional cleaning performance while ensuring user convenience. This model stands out due to its powerful suction technology and advanced features that cater to a variety of cleaning needs.

One of the main features of the Electrolux SIG 401 is its powerful motor, which provides strong suction power across different surfaces. This allows for efficient cleaning on carpets, hard floors, and upholstery, making it versatile for various household environments. The adjustable suction settings enable users to tailor the power to the specific cleaning task at hand, whether it’s removing pet hair or dealing with fine dust.

The vacuum cleaner is equipped with a multi-cyclonic filtration system, which separates dust and debris effectively. This technology not only enhances cleaning efficiency but also helps maintain cleaner air, making it a great choice for allergy sufferers. The SIG 401 also comes with a HEPA filter that captures even the tiniest allergens, ensuring that the air in your home remains fresh and clean.

The design of the Electrolux SIG 401 is both ergonomic and user-friendly. It features an easy-to-maneuver body and a lightweight build, allowing for effortless transportation throughout your home. The vacuum also includes an automatic cord rewind feature, which eliminates the hassle of wrapping the cord after use. Additionally, it is equipped with a large capacity dustbin, reducing the frequency of emptying during cleaning sessions.

Adding to its functionality, the SIG 401 comes with an assortment of attachments designed for specialized cleaning tasks. The crevice tool is perfect for tight spaces, while the upholstery brush effectively lifts dust and pet hair from furniture. These included accessories enhance the overall versatility of the cleaner.

In summary, the Electrolux SIG 401 combines powerful suction, advanced filtration technology, and user-friendly features in a well-designed package. Whether tackling daily messes or deep cleaning, this vacuum cleaner stands out as a reliable ally for maintaining a pristine home environment. Its emphasis on performance and convenience makes it a top choice for those seeking a dependable cleaning solution.