4. CONNECTING TO GAS

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less that R³/8. Connection is made to the Rc ½ (½" B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance. NOTE:

ONLY LIQUID SEALANTS TO BE USED WHEN INLET GAS PIPE IS FITTED TO SHUT OFF VALVE I.E.: DO NOT USE P.T.F.E. SEALANT TAPE. Check for gas soundness after connecting to the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig.3. Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

50 100

850

Fig.3

700

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

250

450

All dimensions in mm

5. CONNECTION TO THE ELECTRICITY SUPPLY

WARNING: THIS APPLIANCE MUST BE EARTHED. DO NOT EARTH THIS APPLIANCE TO THE GAS SUPPLY PIPING.

This appliance must be connected to 230V-240V A.C. 50Hz supply. It is supplied with 2 metres of 5 amp 3 core cable incorporating a moulded 13 amp plug , fitted with a 3 amp fuse, which can be plugged directly into the nearest suitable socket. Ensure the plug is accessible to the user. If this is not long enough, the supply cable can be replaced totally by a longer cable at least 0.75mm² nominal cross sectional area (24/0.2mm).

IF THE MOULDED PLUG IS CUT FROM THE CABLE FOR ANY REASON, IT MUST BE DESTROYED OR DISPOSED OF SAFELY, AS THE PROTRUDING WIRES WILL BE AN ELECTRIC SHOCK HAZARD.

If any other type of plug is used it should incorporate a 3 amp fuse in either the plug or adapter or at the distribution board.

Fig.4

If the cable has to be threaded through small apertures in cabinets etc., it may be disconnected from the appliance, then re-connected to as shown in Fig.4.

DO NOT EXTEND THE CABLE USING PLASTIC OR CERAMIC CONNECTION TERMINAL BLOCKS AND/OR INSULATION TAPE.

ALL EXTERNAL WIRING BETWEEN THE APPLIANCE AND THE ELECTRICAL SUPPLY SHALL COMPLY WITH I.E.E. WIRING REGULATIONS.

42

Page 42
Image 42
Electrolux SIG 405 R installation instructions Connecting to GAS, Connection to the Electricity Supply

SIG 405 R specifications

The Electrolux SIG 405 R is a standout model in the realm of modern refrigerators, merging advanced technology with sophisticated design to meet the needs of contemporary households. This appliance isn't just about storing food; it's about keeping it fresh, organized, and easily accessible.

One of the main features of the SIG 405 R is its advanced cooling technology. It employs a unique DualCooling system, which utilizes two separate circuits for the refrigerator and freezer compartments. This technology prevents the transfer of odors from one section to another, ensuring that the flavors of your foods remain intact. Additionally, it helps maintain optimal humidity levels, prolonging the shelf life of perishables.

The SIG 405 R boasts an impressive storage capacity, making it ideal for families or individuals who like to shop in bulk. The adjustable shelving allows users to customize the layout according to their needs, while the spacious drawers are designed specifically for fruits and vegetables, keeping them fresh for longer periods. The transparent design of these drawers also facilitates easy viewing of contents.

Another notable feature is the efficient LED lighting system, which illuminates every corner of the refrigerator, making it easy to find items, even in low light conditions. This energy-efficient lighting is not only practical but also contributes to reduced energy consumption, aligning with sustainability goals.

The Electrolux SIG 405 R also incorporates innovative features such as a convenient water and ice dispenser. This feature provides chilled water and crushed or cubed ice at the touch of a button, enhancing the user experience and promoting hydration.

Furthermore, the appliance is equipped with a user-friendly control panel that allows for easy temperature adjustments and settings. The built-in alarm system alerts users if the door is left open, providing an extra layer of protection against energy loss and food spoilage.

In terms of design, the SIG 405 R features a sleek stainless-steel finish that adds a touch of modern elegance to any kitchen. Its versatility in color options allows it to blend seamlessly with various interior styles.

In conclusion, the Electrolux SIG 405 R is not just a refrigerator; it’s a comprehensive food storage solution that combines practicality with innovative technology. With its focus on freshness, organization, and energy efficiency, this model represents a perfect choice for those looking to elevate their home kitchen experience.