Manuals / Electrolux / Kitchen Appliance / Cooktop

Electrolux SIG 500 installation instructions Checking the Oven, General Note

Models: SIG 500

1 44

Download 44 pages 1.6 Kb

Page 41

10. CHECKING THE OVEN

1.Turn the oven thermostat to Mk.9 and check that there is sparking from the ignition system. This should continue until the oven burner is alight.

2..When the oven burner lights up the sparking should cease, there should be a low gas rate at first to the

oven burner which is the flame supervision device (F.S.D.) by pass rate.

3.When the F.S.D. phial has heated up it opens the F.S.D. valve and the main gas stream flows to the burner.

4.Set the oven thermostat to Mk.2, close the oven door and check that after about 10 minutes the flame has reduced in size.

5.Turn off the thermostat and check that the oven flames go out.

GENERAL NOTE

Instruct the user on how to use the appliance and its ignition system. Refer the user to the wording in the inside cover which gives advice on the safe operation of the appliance.

41

Image 41

Electrolux SIG 500 installation instructions Checking the Oven, General Note

Contents

SIG Introduction For your safetyContents Hotplate & Grill Lighting the cookerTo turn off any burner OvenGrill High settingHeat control Cooking positionsPositioning food on the grid PreheatingGrill pan is supplied with a removable handle Grill pan and handleBurner sizes HotplateFor your safety Helpful hints Oven shelves OvenHeat zones Roasting Baking trays and dishesCondensation Oven cooking chart Mins. per ½kg 1lb and 25 mins Rolls and buns 10 20 mins 15 25 mins30 40 mins Minute minder Electronic minute minderTo set the time of day To use the minute minderTo cancel the minute minder Food preparation slow cooking Slow cookingLeft over food should be cooled quickly and refrigerated Do not cook casseroles over 3kg 6lbThaw thoroughly before cooking Hotplate Care and cleaning For your safetyClean the grill frequently using hot soapy water When replacing hotplate burner partsGrill Crown to body Do not try to force the crown on to the bodyOven General Oven cleaning cycleTo remove the outer glass Cleaning between the outer and inner door glassInstalling the cooker Cleaning The Door GlassLocation Make sure that a stability bracket is fittedPositioning Cooker dimensionsHeight to hotplate 900mm 920mm Width 550mm DepthMoving your cooker General information For your safetyConnecting to the electricity supply General information Check What is wrong and why?Replacing the oven light bulb Gas Consumers Council Servicing For your safetyInstallation Instructions Connections DimensionsIgnition GrillProvision for Ventilation Important Safety RequirementsLocation of Appliance Fitting the Stability Bracket Parts RequiredLevelling the Appliance Connection to the Electricity Supply Connecting to GASChecking the Grill Pressure TestingChecking the Hotplate Checking LID SHUT-OFF DeviceGeneral Note Checking the OvenSIG 500 Contents Check List Description