Manuals / Electrolux / Kitchen Appliance / Cooktop

Electrolux SIG 500 Pressure Testing, Checking the Grill, Checking the Hotplate

Models: SIG 500

1 44
Download 44 pages 1.6 Kb
Page 40
Image 40
BROWN
BLUE

S I G 5 0 0

If the wiring is extended or a completely new cable fitted a 3-pin 13 amp plug should be fitted. (See Fig.4a).

Connect the wires as follows:

GREEN AND

Fig.4a

BROWN to the Live Terminal.

YELLOW

BLUE to the Neutral Terminal.

 

 

 

GREEN and YELLOW to the Earth Terminal.

 

 

As the colours of the wires in the mains lead which you fit may

 

3 AMP

not correspond with the coloured markings identifying the

 

terminals in your plug, proceed as follows:

 

 

The wire which is GREEN and YELLOW must be connected

 

 

to the terminal in the plug which is marked with the letter 'E' or

 

 

by the earth symbol

or coloured GREEN or GREEN and

 

 

YELLOW.

 

 

 

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 'N' or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 'L' or coloured RED.

FIT A 3 AMP FUSE TO THE PLUG HOLDER.

Ensure that the supply cable cannot get caught by the stability bracket. Plug in the appliance.

6. PRESSURE TESTING

1 The oven injector is used as a pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and remove box front cover. Replace one clip back into the right hand side of the burner box.

Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide burner off injector whilst easing it forward and taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the

appropriate burner. The pressure should be either:-

(i) For Natural Gas

20mbar

(ii)For LP.GasThe pressure must be set to 28 mbar for use on butane or 37 mbar for use on propane.

4.Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the F.S.D. phial is correctly located into the bracket on the burner.

5.Check operation of oven.

7. CHECKING THE GRILL

Place the grill pan containing the trivet into the grill compartment. Light the grill burner by turning the grill tap to its full on position and pushing the ignition button. As soon as the burner is lit the button can be released.

8. CHECKING THE HOTPLATE

Lift the lid. Fit the burner crowns and caps ensuring that they are correctly seated. Fit the pan supports. Check each of the hotplate burners in turn by turning the hotplate tap to it's full on position and pushing the ignition button. As soon as the burners are lit the button can be released.

9. CHECKING LID SHUT-OFF DEVICE

1.Lift the lid.

2.Turn one hotplate burner tap to its full on position and push the ignition button.

3.Close lid. There should now be no gas supply to the hotplate and the burner will go out.

4.Turn off the hotplate tap and lift the lid. The gas supply should now be restored to the hotplate. When the tap is turned on.

40

Page 39 Page 41
Page 40
Image 40
Electrolux SIG 500 Pressure Testing, Checking the Grill, Checking the Hotplate, Checking LID SHUT-OFF Device
Page 39 Page 41

SIG 500 specifications

The Electrolux SIG 500 is a state-of-the-art vacuum cleaner designed for both performance and convenience, making it an ideal choice for homeowners and professionals alike. This model showcases Electrolux's commitment to innovation and user-friendly design, ensuring that every cleaning task is efficient and effective.

One of the standout features of the SIG 500 is its powerful motor, delivering an impressive suction capability that easily picks up dirt, dust, and debris from various surfaces. This ensures that users can tackle everything from carpets to hard floors without the need for multiple cleaning devices. The vacuum's efficiency is further enhanced by its advanced filtration system, which captures not only visible particles but also microscopic allergens, making it an excellent choice for allergy sufferers.

The SIG 500 comes equipped with a multi-cyclonic technology that maintains strong suction power even as the dustbin fills up. This is a crucial aspect, as it ensures consistent performance and reduces the need for frequent maintenance. The dustbin itself is designed for easy emptying, allowing users to dispose of collected debris without making a mess.

Ergonomics is a key consideration in the design of the Electrolux SIG 500. It features a lightweight build, making it easy to maneuver around the home. The vacuum comes with a telescopic handle that can be adjusted to the user's height, ensuring comfort during prolonged cleaning sessions. The vacuum's low-profile design allows it to reach under furniture and in tight spaces, ensuring comprehensive cleaning coverage.

Versatility is another major advantage of the SIG 500. It includes a variety of attachments, such as a dusting brush, crevice tool, and upholstery nozzle, which cater to different cleaning needs. This adaptability means it can handle everything from delicate surfaces to heavy-duty cleaning tasks.

Moreover, the Electrolux SIG 500 operates with low noise levels, making it suitable for use even in shared living spaces without causing a disturbance. With its modern, sleek design, the vacuum not only performs well but also looks great in any home.

In summary, the Electrolux SIG 500 stands out in the market due to its powerful suction, advanced filtration, user-friendly design, lightweight portability, and versatile attachments. This vacuum cleaner is perfect for those seeking a reliable, efficient cleaning solution for their home or workspace.