Electrolux T37400 operating instructions Control panel, Low temperature button, Buzzer OFF button

Structure of the appliance

Control panel

1 Programme chart/Selector dial

This will help you to select the correct programme for drying: electronically or time controlled. Turn the dial to the required programme or time.

2 ON/OFF button

This button is used to switch the dryer on. At the end of the pro gramme, release this button by pressing it again

to switch the dryer off.

3 Mains-on light

It comes on when the appliance is switched on (ON/OFF button pressed down) and goes out when this button is released.

4 Low temperature button

Pressing this button allows drying to be performed at a lower tem- perature, for delicate items. The corresponding pilot light comes on.

5 Buzzer OFF button

Press this button when selecting the programm if you wish to switch the buzzer off during the anticreasing phase.

The corresponding pilot light comes on.

6 Start button

Press this button for about 2 seconds to start the dryer after having selected the drying programme.

If the door is opened while the programme is running, this button must be pressed again after closing the door in order to re-start the programme from the point at which it was interrupted.

This button must also be pressed after a power cut.

In both cases light DRYING or COOLING (depending on the phase in progress) flashes to remind you that the start button needs to be

12