Something not working?
If a problem occurs, you can try to solve it yourself following the instructions below. If you call out an engineer when one of the following problems occurs, or to repair a fault due to incorrect use, the
Problem
The dryer does not work.
Unsatisfactory drying results.
The drying cycle is too long.
Possible cause
The door has not been closed.
The plug is not properly inserted in the power socket. There is no current at the socket.
The main fuse or the fuse in the plug has blown.
A drying programme or time has not been selected. The START button has not been depressed.
The laundry has not been spun properly.
The filters are clogged up.
The room temperature is too high.
The selected drying cycle was not suitable for the laundry. The LOW TEMP. button has been pressed.
There is too much laundry inside the appliance. The dryer is not correctly installed.
Clean the fluff filters.
If you cannot find any useful information in these operating instruc- tions to solve your problem, please contact our nearest service centre.
22
