5
Caring for your Hedgetrimmer
J |
K |
L
Cleaning (J)
1.Using a soft brush - remove debris from all air intakes and cutting blade.
2.Wipe over surface of your hedgetrimmer with a dry cloth.
•IMPORTANT
Never use water for cleaning your hed- getrimmer. Do not clean with chemicals, including petrol, or solvents - some can destroy critical plastic parts.
Lubricating the Cutting Blade
For easier operation and longer life, lubricate the cutter blades before and after use. Apply the oil so that it runs between the two blades.
See Pic K.
At the end of the Cutting Season.
1.Clean your Hedgetrimmer thoroughly.
2.Check that all nuts and bolts are secure.
3.Visually inspect the Hedgetrimmer for any worn or damaged parts, contact your local Service Centre if any parts require replacement.
To store your Hedgetrimmer
•The Hedgetrimmer blade cover/storage
holder is provided with 2 hanging slots for storing the Hedgetrimmer on the wall.(See
Pic L)
•Ensure the blade cover/storage holder is
M |
N |
fitted before storage.
1.The use of 2 number 10 screws (40mm in length) and the appropriate wall fixing plugs is recommended
2.Drill 2 holes 47mm horizontally apart.
3.Fit wall plugs.
4.Fit screw ensuring enough length is avail-
able for secure location into hanging slot.
•Your mains cable can be stored with the blade cover/storage holder fitted. (Pic M &
N)
•Store in a dry place where your Hedgetrimmer is protected from damage.
