Programming options
Objective Implementation
Permanently programme
in the audible signal
which reminds you that
the programme is com-
plete.
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL button and hold down for
approx. 5 seconds.
A brief signal sounds several times. The AUDIBLE SIGNAL
display flashes several times.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
Adjust “level of dryness”
detection:
If the laundry is slightly
drier or slightly damper
at the end of the pro-
gramme
than with the
standard setting.
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL and SENSITIVE buttons at the
same time and hold down for approx. 5 seconds. The cur-
rent setting appears on the multi-display:
–C0: Setting for drier laundry
–C1: Standard setting
–C2: Setting for damper laundry
3. Press the START/PAUSE button until the setting required
appears on the multi-display.
4. Turn the programme selector to OFF.
The setting is permanently programmed.
To deactivate the EMPTY
WATER display when
using
an external drain for
the condensed water.
1. Turn the programme selector to any programme.
2. Press the DOOR and SPECIAL CARE buttons at the same
time and hold down for approx. 5 seconds. The multidisplay
briefly displays ”0”
The EMPTY WATER display is permanently deactivated.
The setting is cancelled as described under 1 and 2; the
multi-display however briefly displays ”1” (rather than
”0”).
24
125985032.qxp 2006-07-17 11:15 Page 24