16electrolux daily use
Starting the programme
Press the Start/Pause button. Led above stops flashing, becomes steady. The pro- gramme is started. Lighting status LED shows you cycle run.
Changing programme
To change a programme which has been selected by mistake once the programme has started, first turn the programme selector to OFF Aus position. The programme is cancelled.
The programme can no longer be changed directly once the programme has started. If nevertheless there is an attempt to change the programme on the programme knob or if an function button (excluding the BUZZER Signal button) is pressed, led above Start/Pause button starts flashing temporarily in yellow. The drying programme is not however affected by this (laundry protection).
Putting in extra items or taking items out before end of programme
1. Open loading door.
Laundry and drum can become hot. Risk of burns!
2.Load or remove laundry items.
3.Close loading securely. Lock must audibly lock.
4.Press the Start/Pause button to continue the drying cycle.
