26 electrolux what to do if ...
Loading door does not close.
When a button is pressed, led above Start/Pause button is lighting in yellow temporarily.
Programme inactive, empty water tank warning led is light- ing.
Drying cycle ends shortly after pro- gramme starts.
Fine strainer not in place and/or mesh filter not locked in place.
Washing protection. After the start of the programme, the option can no longer be set.
Condensate tank is full.
Not enough washing loaded or washing loaded is too dry for selected programme.
Install fine strainer and/or snap large mesh filter into place.
Turn the programme knob to OFF Aus. Set the pro- gramme again.
Empty condensate tank, then start programme with Start/Pause button.
Select time programme or higher drying level (e.g. EX- TRA DRY Extratrocken in- stead of CUPBOARD DRY Schranktrocken).
Drying cycle lasts an unusually long time. Note: After around 5 hours the drying cy- cle ends automatically (see „Drying cycle com- plete ”).
Lint filter clogged.
Fluff filter clogged.
DELICATE Schon button pressed and/or load volume too big.
Laundry insufficiently spun.
Particularly high room temperature. Temporary switching off of the com- pressor to avoid overload.
Clean lint filter.
Clean fluff filter.
Reduce load volume.
Laundry must be adequately spun.
Automatic process, there is no fault with the appliance. If possible, lower the room temperature.
