INDICATION
MANDATORYINFORMATION INSTRUCTION
WARNINGPROHIBITION
These signs will give advise for your safety
Before leaving our factory every machine is thoroughly tested.
Follow our instructions strictly and your machine will give you long service in normal operating conditions.
1. Features
Use: Sawing of tile materials.
Tools: Diamond blades
(For information contact your FELKER→ supplier)
Blade Capacity: Ø 8″ (200 mm) – bore 5/8″ (15.9 mm).
Blade Rotation:
Cutting Thickness (material): 1 5/8″ (41.2mm) Cutting Diagonal @ 10″ (254mm)
Cutting Length: 14″ (356mm)
Blade Cooling: Water pump
Horsepower: | 3/4 |
Voltage: | 115 Volts, 60 Hertz, |
Amperage: | 4.2 amps |
Blade Shaft RPM: (3300) | |
Weight lbs. (kg.): | 36.5 (16.5) |
Dimensions (L x W x H): 26″ x 16.5″ x 14″ (660 x 419 x 356mm)
Pan Holding Capacity: 9.3 quarts (8 liters)
Before starting up the machine, make sure you read this entire manual and are familiar with the operation of this machine.
The working area must be completely clear, well lit and all safety hazards removed.
The operator must wear protective clothing appropriate to the work he is doing.
Any persons not involved in the work should leave the area.
Use only blades marked with a maximum speed greater than the blade shaft speed.
2. Benefits
Your FELKER→ tile saw is a ruggedly constructed unit engineered to give long, satisfactory performance. Simple, daily maintenance and care will add to the life and productivity of your tile saw.
•Light weight for easy maneuverability and maintenance.
•Has a durable polymer cutting table – able to handle almost any cutting job due to its reinforced construction.
•Cutting table designed to drain water quickly back into the water tray for efficient recycling of water.
•Cast blade guard with hinge to allow easy removal of cutting blade.
•Cutting table runs on nylon wheels for smooth and accurate cuts and easy maintenance.
•Water tray of durable polymer construction to resist rust and to drain water and sediment much faster.
10
