Electrolux TRIMKITEZ1 Trim Kit Leveling See Single and Dual Installations, Kick Plate Attachment

INSTRUCTION SHEET

12.Trim Kit Leveling (See Figure 16) (Single and Dual Installations)

a.To raise front of unit, turn leg leveler to left with adjustable wrench to fit 1-¼” hex.

b.To raise back of unit, adjust bolt clockwise with

3/8” socket or flat head screwdriver.

To raise or lower door, adjust 7/16” bolt.

	3/8” Bolts
	Phillips Head
	Screws
To raise back of
unit, adjust bolt
clockwise.	Leg Leveler

Figure 16

13.Hinge Adjustment (See Figure 16) (Single and Dual Installations)

a.The bottom hinge is designed to make final minor adjustments for door to door and door to cabinet alignment.

b.Hinge will move side to side 3/32” and raise up 1/8”.

Use a 7/16” socket or open end wrench to raise or lower the door.

Use a 3/8” socket and a Phillips screwdriver to loosen bottom hinge. Shift door left or right, then retighten screws and bolts.

14.Side Trim Attachment to Kitchen Cabinets (Single and Dual Installations)

a.Fasten bottom of side trim with screw.

(See Figure 17).

b.Fasten screws to top trim. (See Figure 18).

Figure 17

Figure 18

15. Kick Plate Attachment

(Single Unit) Attach the kick plate to the cabinet with two (2) screws. (See Figure 19).

(Dual Unit) Attach the kick plate to the cabinet with four (4) screws. (See Figure 20).

Figure 19

Screws Screws

Figure 20

©2013 Electrolux Home Products, Inc. Instruction Sheet A00343901 11.04.13