8. Start Button | 9. Programme Phase indicator |
| Light |
This button has two functions: Start / Pause.
Start:
After having selected the required programme, press this button to start the machine; the corresponding LED stops flashing.
If you have selected the delayed start, the machine begins its countdown. The duration of the programme or the delay appears on the display.
Pause:
To interrupt a programme which is running, press the “Start” button: the corresponding LED starts to flash.
To restart the programme from the point at which it was interrupted, press the “Start” button again
By selecting the wash programme, the LED corresponding to the various phases making up the programme lights.
After you have started the programme, only the LED relevant to the phase that is currently being carried out will remain lit.
At the end of the programme the “End” LED illuminates.
The “End” LED flashes in the event of operating problems. And the relative alarm code appears on the display.
E10 | = the machine does not fill |
E20 | = the machine does not empty |
E40 | = the door has not been closed |
To eliminate the problem, see paragraph “Something not working”.
9
