5
Before use
Remove all securing tapes. Wash inside the
appliance with lukewarm water and
bicarbonate of soda (5 ml to 0.5 litre of water).
Do not use soap or detergent as the smell may
linger. Dry thoroughly.
Control panel and functions
5
6
4
2
1
3
➁➁➂➂➃➃➄➄➀➀
➀➀Pilot light (green)
➁➁Thermostat control knob
➂➂Fast freeze light (yellow)
➃➃Fast freeze switch
➄➄Warning light (red)
Starting your appliance
Insert the plug into the wall socket.
Turn the thermostat knob ➁➁clockwise after
the position «O». The pilot light ➀➀will light
up., indicating that the appliance is powered.
The warning light ➄➄will blink indicating that
the temperature inside the appliance is too
high.
To stop operation, simply turn the thermostat
knob to position «O».
Temperature control
The temperature inside the freezer is regulated
by a thermostat control knob ➁➁ with 6
temperature positions and one «OFF» (O)
position.
Position 1 = minimum cold
Position 6 = maximum cold
Turn the thermostat control knob to the required
position.
An intermediate position is usually the most
suitable, although the temperature will be
affected by:
• Room temperature
• How often the door is opened
• How much food is stored
• Position of the appliance
In determining the correct temperature control
setting all these factors have to be considered
and some experimentation may be necessary.
To obtain a lower temperature, turn the
thermostat control knob to the higher numbers;
to obtain a higher temperature turn the control
knob to the lower numbers.
When altering the temperature setting, allow 24
hours for the temperature to stabilise before
making further changes.