Operating instructions
Use of "3 in 1" combi detergents
These products are detergents with a combined cleaning, rinsing and salt function.
1.Check whether these detergents are suitable for your water hardness. Follow the manufacturers instructions.
2.Set the "3 in 1" function.
3.Before the start of the washing programme put the "3 in 1" detergent in the detergent dispenser.
NOTE: If the drying results are not satisfactory we recommend that you:
1.Fill up the rinse aid dispenser with rinse aid.
2.Activate the rinse aid dispenser and set the rinse aid dosage to position 2.
If you decide to turn back to the use of the standard detergent system we advise that you:
●Deactivate the "3 in 1" function.
●Fill up the dispensers for salt and rinse aid again.
●Adjust the water hardness setting to the highest setting perform up to 3 normal washing programmes without loading any dishes.
●Adjust the water hardness setting according to the hardness of the water in your area.
●Adjust the rinse aid dosage.
NOTE: When using 4 in 1 detergents that integrate also
25