Operating instructions
The opening of the door during the countdown will not modify the delay start.
Once the delay start has elapsed the programme will start automatically.
Note: it is possible to select a washing programme and the delay start also with the door slightly opened.
In this case the start of the programme or of the countdown will occur after the closure of the door.
Until that moment it is possible to modify the set made.
6.To interrupt or cancel a washing programme in progress
Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary
Attention! Hot steam may escape when the door is opened.
Open the door carefully.
Interrupt a washing programme in progress
a)Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted.
b)Press the On/Off button, in this case all the indicator lights turn off. Press the On/Off button again; the programme will start from the point at which it was interrupted.
Cancel a washing programme in progress
To cancel a washing programme you have to reset the dishwasher; press simultaneously function buttons 2 and 3 for about 2 seconds, the indicator light of the button corresponding to the running programme starts flashing. After about 2 seconds the indicator lights of all the programme selection buttons will illuminate, this means that the running programme has been cancelled and that the machine has returned to setting mode.
If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.
28
