Select the required programme by
means of programme selector dial (1)
You can choose the right programme for
any type of laundry following the descrip-
tions on the washing programme tables
(see «Washing Programmes»).
Turn the programme selector dial to the re-
quired programme. The programme selec-
tor determines the type of washing cycle
(e.g. water level, drum movement, number
of rinses) and the washing temperature ac-
cording to the type of laundry.
The pilot light of button 7 starts blinking and
the display shows the duration of the selec-
ted programme.
The selector dial can be turned either clock-
wise or anticlockwise. Position to Reset
programme/ Switching OFF of the machine.
At the end of the programme the selec-
tor dial must be turned to position ,
to switch the machine off.
If you turn the programme selector dial
to another programme when the ma-
chine is working, the yellow pilot light of
button 7 will blink 3 times and the mes-
sage Err is displayed on the display to
indicate a wrong selection. The ma-
chine will not perform the new selected
programme.
Select the desired TEMPERATURE
(Button 2)
When selecting a programme, the appli-
ance automatically proposes the de-
fault temperature provided for that pro-
gramme.
Press this button repeatedly to increase or
decrease the temperature, if you want your
laundry to be washed at a temperature dif-
ferent from the one proposed by the wash-
ing machine.
The symbol of cold wash corresponds to -
- ( ) .
For the maximum and the minimum
available wash water temperature, see
«Washing programmes».
Select the spin speed, NIGHT CYCLE or
RINSE HOLD option (button 3)
When the required programme has
been selected, your appliance automat-
ically proposes the maximum spin
speed provided for that programme.
Press this button repeatedly to change the
spin speed, if you want your laundry to be
spun at a speed different from the one pro-
posed by the washing machine.
RINSE HOLD: by selecting this option the
water of the last rinse is not emptied out to
prevent the fabrics from creasing. At the
end of the programme, and RINSE
HOLD symbol appear on the display,
DOOR symbol (door locked) remains lit, the
pilot light of button 7 goes off and the door
is blocked to indicate that the water must
be emptied out.
NIGHT CYCLE: by selecting this option, the
machine will not drain the water of the last
rinse, so as not to wrinkle the laundry. As all
spinning phases are suppressed, this wash-
ing cycle is very noiseless and it can be se-
lected at night or in times with a more eco-
nomical power rate. In some programmes
the rinses will be performed with more wa-
ter. At the end of the programme, and
RINSE HOLD symbol appear on the dis-
play, the DOOR symbol remains lit, the pilot
light of button 7 goes off and the door is
blocked to indicate that the water must be
emptied out.
To empty out the water, please read
chapter «At the end of the programme».
Programme option buttons
Depending on the programme, different
functions can be combined.
Warning!
Not all the options are compatible among
themselves. The symbols of the incompati-
ble options disappear.
Anyway, if an option, which is not compati-
ble with the set washing programme or any
other option, is selected, the Err message
is displayed for few seconds and the yellow
pilot of button 7 light starts blinking.
You must select the options after you have
selected the programme but before press-
electrolux 37