INSTALLATION INSTRUCTIONS

4.GAS CONNECTION

The installation of the gas connection, as well as the laying of the customer's gas line, is only to be carried out by an author- ised specialist subject to the relevant national and local regula- tions.

NOTE

The gas appliance may only be installed in an adequately ventilated location.

Appliances are set up for natural gas. The type of gas, gas pressure and gas category are entered on the specification plate. Prior to connection, check that the appliance is set up for the type of gas available on site. To do this, compare the details on the specification plate with the existing gas data.

If this is not the case, the appliance must be converted or adapted by the service personnel responsible to suit local conditions. The following points should be noted:

-Has the appliance been tested for the new gas data?

-Conversion in accordance with the Service Manual.

-A new specification plate or a durable marking with the new gas data must be affixed to the appliance.

4.1CONNECTION

Gas-only appliances as well as combination electric and gas appliances require a gas connection.

The gas connection is located under the appliance on the right hand side. For all types the gas connection is NPT 3/4“.

The installation of a dirt trap in the gas supply line by the owner is recommended.

After connection, all lines carrying gas must be tested for leaks at operating pressure by painting with non-corrosive foam- forming media, (e.g. soapy water or leak spray).

4.2GAS PRESSURE

The current gas pressure should be measured at the Mertik regulator with a liquid U-tube manometer (scale at least 0.1 mbar = 1 mm water column).

DRemove the control panel. The measuring nipple is located in downwards direction at the gas supply pipe before the two gas valves.

DClose off the mains gas leading to the appliance.

DThe measuring nipple is provided at the left side of the reg- ulator. The incoming pressure is measured in front, the out- going pressure behind.

DLoosen the slotted screw (1 turn) in the measuring nipple. Then connect the pressure gauge by attaching a flexible tube to the nipple (out-side diameter 8 mm).

DOpen the main gas leading to the appliance.

DRun all burners on the appliance at full output.

DCheck whether the connection pressure is in permitted tol- erance.

DTurn off the appliance again.

DClose the main gas valve.

DRetighten the slotted screw in the measuring nipple. Gas pressure deviation tolerances are laid down by EN 203. If the existing gas pressure is outside the given tolerances, correct combustion can no longer be ensured. Compulsory measures: pressure adjustment by the gas works or con- version of the range by the service personnel. Please refer to "Conversion to another gas type".

Gas pressure tolerances

Gas pressure variation tolerances are as

follows: mbar

Gas type

Normal

Min.

 

 

pressure

pressure

 

 

inch

mbar

inch

mbar

 

 

water g.

 

water g.

 

 

 

 

 

 

 

Natural gas

A

7

17.4

3.5

8.7

USA

 

 

 

 

 

 

 

 

 

 

 

Liquid gas

E

11

27.4

8.0

20

Propane

 

 

 

 

 

USA

 

 

 

 

 

 

 

 

 

 

 

Seite 8

62.9677.01_UL

Page 10
Image 10
Electrolux WHGURFOOOO, WHGUSFOOOO Installation Instructions GAS Connection, GAS Pressure, Gas pressure tolerances

9CHG584124, 9CHG584122, WHGUSFOOOO, 9CHG584125, WHGURFOOOO specifications

The Electrolux WHGURAOOOO, WHGUSAOOOO, 9CHG584123, WHGURFOOOO, and 9CHG584125 are part of Electrolux’s innovative line of kitchen appliances designed to enhance culinary experiences with advanced technology and modern features. These models cater to the needs of contemporary households, emphasizing efficiency, versatility, and user-friendly functionality.

One of the standout characteristics of these models is their energy efficiency. Each appliance is designed to help minimize energy consumption while maximizing performance. This is crucial in a time when sustainability is at the forefront of consumer choices. The energy-efficient systems not only save costs on utility bills but also lessen the environmental impact, making them a responsible choice for eco-conscious consumers.

The WHGURAOOOO and WHGUSAOOOO models are particularly acclaimed for their intuitive user interface, which allows for effortless operation. With easy-to-navigate control panels and touch-sensitive buttons, users can quickly configure settings to suit their cooking preferences. Moreover, these models often come equipped with smart technology, enabling users to monitor cooking progress remotely via smartphone apps. This feature enhances convenience, allowing for multitasking with ease.

In terms of cooking capabilities, these models offer versatile cooking options. With built-in multi-function settings, users can easily switch between grilling, baking, and steaming. The 9CHG584123 and 9CHG584125 models showcase advanced cooking modes that ensure precise temperature control, promoting evenly cooked meals. Additionally, the WHGURFOOOO’s unique steam function allows for healthier cooking options by preserving nutrients in food.

Safety is another critical aspect of these Electrolux models. They are equipped with child safety locks and automatic shut-off features to prevent accidents, ensuring peace of mind for families. The durable materials used in their construction guarantee longevity, making them a worthwhile investment for any kitchen.

Overall, the Electrolux WHGURAOOOO, WHGUSAOOOO, 9CHG584123, WHGURFOOOO, and 9CHG584125 models embody a perfect blend of style, technology, and functionality. They aim to transform routine cooking into a joyous and efficient experience, appealing to both novice cooks and seasoned chefs alike. With these intuitive appliances, preparing delicious meals and embracing culinary creativity has never been easier or more enjoyable.