Electric
Supply voltage: | 534178 (WT82BL208) | 208 V/3ph/60Hz |
| 534179 (WT82BR208) | 208 V/3ph/60Hz |
| 534180 (WT82BL240) | 240 V/3ph/60Hz |
| 534181 (WT82BR240) | 240 V/3ph/60Hz |
Dishwasher requires two separate electrical service connections. Connection 1 for RINSE MODULE; Connection 2 for WASH MODULE. Refer to below table for Amp requirements.
Connection 1: | 208 V/3ph/60Hz | 71A |
| 240 V/3ph/60Hz | 62A |
Connection 2: | 208 V/3ph/60Hz | 69A |
| 240V/3ph/60Hz | 62A |
Total Amp Load: | 208 V/3ph/60Hz | 133.8A (44.1kW) |
| 240 V/3ph/60Hz | 118.9A (44.1kW) |
Exhaust Requirements
Unit supplied as standard with extended vent hoods (can be removed during installation if not required).
Exhaust extraction not more than 177 CFM (300m³/h)
Refer to installation diagram for minimum exhaust hood installation height .
Key Information
Productivity racks per hour | 350 racks / 6300 dishes |
(max speed): | (average 18 dishes per rack) |
Productivity racks per hour | 250 racks / 4500 dishes |
(min speed): | (average 18 dishes per rack) |
Table to Table connection: | |
Number of Tanks: | 2 |
Height with door open: | |
Charging hole size (width): | |
Charging hole size (height): | |
Shipping weight: | 1268 lb (575 kg) |
Shipping width: | |
Shipping depth: | |
Shipping height: | |
Shipping volume: | 157 cu.ft (4.46 m³) |
Noise level: | <70 dBA |
Unit predisposed to accept external detergent dispensers, detergent probes and rinse aid dispensers.
Warewashing
82″ Multi Tank Conveyor Dishwasher
WT82
Water
Inlet Water Supply Pressure: | 22 – 102 psi (150 – 700 kPa) |
Inlet Hot Water Supply Temperature | 140 °F (60 °C) |
for wash and rinse section: |
|
Inlet Water Supply Hardness: | |
Incoming Hot Water Line Size | G 3/4″ |
(wash and rinse section): |
|
Drain line size (wash section): | G |
Drain line size (rinse section): | G |
Hot Water consumption: Gallons/hr: | 87 gal/hr (330 liters/hr) |
Water consumption/rack: | 0.3 gal/rack (0.75 l/rack) |
Wash Temperature: | 160 – 172 °F |
Wash tank size: | 40 gal (150 liters) |
Wash pump power (top wash arms): | 3 hp (2.2 kW) |
Wash pump power (lower wash arms): | 1.5 hp (1.2 kW) |
Power Rinse Temperature: | 160 – 172 °F |
Power rinse tank size: | 6 gal (23 liters) |
Rinse pump power: | 0.4 hp (0.32 kW) |
Final Rinse Temperature: | 180 – 194 °F |
Final Rinse water flow: | 79 gal/hr (300 l/hr) |
Hot water booster capacity: | 3.17 gal (12 liters) |
Initial fill Hot Water requirements: | 40 gal (150 liters) |
Warewashing |
|
82″ Multi Tank Conveyor Dishwasher WT82 |