1
2
CLEANING THE HOSE AND NOZZLE
The vacuum cleaner stops automatically if the nozzle, tube or hose becomes blocked, or the filter and dustbag are blocked. Disconnect from the mains and allow the vacuum cleaner to cool down for approximately
Tubes and hose
1Use a cleaning strip or similiar to clear the tubes and hose.
2It is sometimes possible to clear the hose by "massag- ing" it. However, be careful in case the obstruction has been caused by glass or needles caught inside the hose.
Note: The warranty does not cover any damage to hoses caused by cleaning them.
Cleaning the floor nozzle
3To avoid reduction in suction power, frequently clean the dual purpose floor nozzle. The easiest way to clean it is by using the hose handle.
3
6
