Electrolux Z2315 manual Replacing the motor filter, Cleaning the Microfilter Z2306, Z2312

1

23

4 5 6

REPLACING THE DUSTBAG

Replace the dustbag as soon as the indicator becomes fully illuminated, when the cleaner is operating at maximum power and the nozzle is raised from the floor.

1Remove the hose and open the dustbag cover.

2Pull the cardboard holder to remove the dustbag.

3Insert a new dustbag by pushing the cardboard holder straight down in its tracks. Close the cover.

Note: Replace the dustbag even if it is not full (it may be blocked). Also replace after using carpet cleaning powder. Use only Electrolux original dustbags.

Dustbag reference number: E51

Replacing the motor filter

(The motor filter should be cleaned approximately every three months, or when required for more frequent use).

4Remove the old filter with grill.

5Take the filter out of the grill and insert a new one in grill.

6Replace the filter with grill and close the cover.

Filter reference number: EF51.

Cleaning the Microfilter (Z2306, Z2312)

(The exhaust filter should be replaced approximately every 4 months).

7-8Open the filter grill to remove the exhaust filter.

9Rinse the filter under tap water and dry it completely. 8-7Replace the filter with grill and close the filter grill.

7

89

Changing the HEPA filter (Z2315)

(The exhaust filter should be replaced approximately every 4 months).

7-8Open the filter grill to remove the exhaust filter.

8-7Replace it with a new one and put it back into the cleaner. HEPA filter reference number: EF51b.

Note: Do not use cleaning agents and avoid touching the delicate filter surface.

5